| CTD Processing Summary CalCOFI 1609SR CTD Preliminary Data | |||
| Download 1609SR CTD raw cast files zipped | Download 1609SR Preliminary CTD + bottle data | ||
| General CTD Notes - data acquisition notes, logistics, processing - see below. Please note that these regressions are generated from preliminary CTD vs bottle data and will NOT be reprocessed since final bottle data will not be processed. This was a test cruise and minimal bottle samples were collected. CTD sensor data are good and have been processed normally. Both primary & secondary sensor profiles vs bottle data have been generated and archived in the downloadable CTD+Bottle data files. These plots are under the "csv-plots\Primary" & "csv-plot\Secondary" subdirectories. Please note: if re-processing the CTD raw cast data, the RV Sally Ride deck unit used was misconfigured, offsetting the primary and secondary conductivity 0.73sec instead of 0.073sec. An offset of -0.657sec should be applied using AlignCTD to calculate salinity correctly. These will not be imported into the CalCOFI database or processed into final form. They are provided as an archive. |
|||
| CTD sensor corrections derived by comparing CTD sensor data, 4sec average prior to bottle closure, to bottle samples | |||
| Dual T, S, & O2 | Primary Sensor | Secondary Sensor | |
| Salinity offset (bottle - CTD salinity; > 350m only; Seabird SBE4) | 0.0009 | -0.0028 | |
| Oxygen ml/L (dual Seabird SBE43) | y = 0.9793x +0.0519 R² = 0.9996 |
y = 0.9887x + 0.0428 R² = 0.9996 |
|
| Oxygen umol/Kg (dual Seabird SBE43) | y = 0.9802x +2.4261 R² = 0.9996 |
y = 0.9897x +2.0275 R² = 0.9996 |
|
| Single sensors | Linear | Polynomial | |
| Nitrate - ISUS 4sec ave voltage vs Bottle Nitrate (Satlantic MBARI-ISUS v2) | Not deployed | ||
| Fluorometer - linear & polynomial regressions |
y = 7.0964x + 0.1209 R² = 0.5325 |
y = 16x2 + 1.6522x + 0.4331 |
|
 |
 |
||
 |
 |
||
 |
|||
| General notes: These are cast & preliminary CTD Processing Notes from 1609SR Test cruise | |||
 |
|||
|
CalCOFI 1609SR/SR1606 RV Sally Ride Science Verification Cruise CalCOFI 1609SR was a test cruise occupying 9 coastal stations. Unfortunately, naval operations west of sta 93.28 stopped us from heading further offshore as originally scheduled. After 93.28, we headed north and worked our way out to Catalina Island. We did a 24 bottle 1160m cast on 90.37. All other stations were 12 bottles or less so check samples were minimal. At least 50% of the bottle samples were analyzed after we returned to SIO. Chlorophylls from the second day were not run until 2 days after returning so may be questionable. All data from the CTD sensors are good but the RV Sally Ride deck unit conductivity offset was misconfigured. Primary & secondary conductivity were offset 0.73 seconds instead of the proper 0.073 seconds. So a -0.657 offset to conductivity was applied in post-processing using AlignCTD. Additionally, there were very few deep salts (deeper than 340m) to calculate an offset and correct the primary & secondary salinities. Oxygens had more samples and the regression comparisons look pretty good. Temperature, salinity, and oxygen data from this cruise are useful but will not be added to the CalCOFI database. If we had been able to occupy more stations offshore, then we would consider adding them as ancillary data. They are reported here as an archive of the science verification cruise. The CTD temperature, conductivity, and oxygen sensors were freshly calibrated or deployed for the first time after calibration months earlier. There did not appear to be any issue with the sensors except the misconfiguration of the deck unit causing spikes in the salinity profiles during the cast. Please note that net tows were performed but samples were not saved. There are no associated zooplankton samples to compare to the hydrographic data. This was a test cruise prelude to November 1611SR CalCOFI. An 88m CTD cast (1609002) at Sta 93.4 27.0 was ~100yd SE of Uwe Send's Del Mar Mooring. These data may be used for comparison to the mooring data. A final version of these data is not planned since there will be no point-checking or data quality assessment beyond basic error-checking. JRW 10/18/2016 |